NPCT-05
PRESSURE CALIBRATOR
This calibrator can be applied in the field of leak tester and various engineering.
It is possible to check pressure and fine differential pressure with this calibrator.
It is possible to check pressure and fine differential pressure with this calibrator.
Key Feature
1. Test pressure port : Connect to WORK port of PT 1/8 LEAK TESTER
2. Fine flow needle valve : 0 ~ 5mm stroke
3. ZERO : Press AUTO ZERO for about one second if the point of Zero is dislocated.
4. Air tube caliber : 6⌀(6mm⌀)
5. Dimension : W160 × H110 × D250
6. Power : AC95 ~ 240V, 50Hz ~ 60Hz
7. Weight : 3.1kg
2. Fine flow needle valve : 0 ~ 5mm stroke
3. ZERO : Press AUTO ZERO for about one second if the point of Zero is dislocated.
4. Air tube caliber : 6⌀(6mm⌀)
5. Dimension : W160 × H110 × D250
6. Power : AC95 ~ 240V, 50Hz ~ 60Hz
7. Weight : 3.1kg
Specification
1. Pressure measurement range : 0 ~ 1.0Mpa
2. Minimum pressure display value : 0.001MPa
3. Pressure connection port : PT1 / 8(R1 / 8)
4. Pressure check : Connect to the port of AIR LEAK TESTER
5. Differential pressure measurement range : 0 ~ 2000Pa
6. Minimum differential pressure : 1Pa
7. Differential pressure connection port : PT1 / 8(R1 / 8)
8. Differential pressure check : Connect to the port of AIR LEAK TESTER
9. Pressure, differential pressure display : Green 7 SEGMENT
10. Display conversion : Button switch
11. AUTO ZERO on display : Button switch
12. Exhaust valve of differential pressure : Use DET / EXHAUST lever
13. Dimension : W160 × H110 × D250
14 : Power : AC95 ~ 240V , 50Hz ~ 60Hz