NPM-2000A
PROCESS METER(MULTI METER)
16 bit ADC(converter) is equipped and built-in the functions of the Process Meter(multi-function & automatic scaling) on it.
This machine is convertible to 8 channels, so it is able to work as 8 different machines.
It is possible to configure the sensors as pressure, temperature, length, displacement, flow, weight, and instrumentation & control of 8 points is possible with pressure.
This machine is convertible to 8 channels, so it is able to work as 8 different machines.
It is possible to configure the sensors as pressure, temperature, length, displacement, flow, weight, and instrumentation & control of 8 points is possible with pressure.
Key Feature
64 types of measurements are possible with 8 types of sensor input.
Specification
| Item | Specification | Remarks | |
|---|---|---|---|
| 1 | Input patterns |
±0 ~ 200V, Auto, Manual, ±2mA, 4 ~ 20mA, Auto, Manual bridge(PowerDC 5V or current) |
Input impedance is over 120KΩ - Input resistance 160KΩ |
| 2 |
Input No. (CH 1 ~ 6, A, B) |
DC voltage input 4 ports(CH 1 ~ 4) DC electric current 2 ports(CH 5, 6) Amplifier input 2 ports(CH A,B) |
8 EA input |
| 3 | Work No. (Channel no.) |
8 EA WORK No. : 7 |
Externally convertible |
| 4 | Maximum HOLD (Minimum HOLD) |
Input terminal available(common) | Externally convertible |
| 5 | Auto Zero | Input terminal available(common) | Externally convertible |
| 6 | Reset | Input terminal available(common) | Externally convertible |
| 7 | Analog output | 0 ~ +5V, 0 ~ +10V, 4 ~ 20mA | Selectable |
| 8 | Printer | Printer interface signal output terminal available | |
| 9 | Communications | RS232C, Input/Output terminal available.(9600, 19200bps option) | |
| 10 | Output control signal | LL, L, OK, H, HH, Open Collect Maximum 30, 50mA | Any value can be set |
| 11 |
Output control signal Hysteresis |
0 ~ 100% setting available | Selectable |
| 12 | Display1 | Green 7 Segment LED 4 ports(±9999) | Display measurement data |
| 13 | Display2 | 16ports 2lines LCD(Back Light equipped) | Work No. & unit |
| 14 | A/D Converter decomposition function | 16bit | |
| 15 | Sampling | 10회 / sec | |
| 16 | Accuracy | Pressure : ±0.2% ~ 1.0% F.S(depends on sensors) Voltage, current pressure : ±0.2% F.S |
|
| 17 | Filter | 1~31 | |
| 18 | Unit(input option) |
Electricity : mV, mA, A, Ω, V Pressure : Pa, hPa, kPa, MPa, mmH2O, mmHg, cmHg, gf/cm2, kgf/cm2, torr, bar, atm, psi Torque, Weight : kg.cm, kg, Ton Flow : cc/sec, cc/min, cc/hour, l/sec, l/min, l/hour Others : ℃, %, RPM etc.(사용자 편집가능) |
Designating the registered unit is available. Display on the LCD |
| 19 | Dimension | DNA Standard W : 96 × H : 96 × D : 180(with connector) | |
| 20 | Usage Temperature | 10 ~ 40℃ | |
| 21 | Power consumption | 0.15A | |
| 22 | Power | DC : 24V | |
| 23 | Weight | about 700g |
